The production line utilizes scrap copper as raw material to produce anode plates. Scrap copper is melted and refined to yield crude copper slabs with a copper content of over 98.5% (equivalent to anode plates). The production line has a daily output of up to 30 tons. It features a concise process, high adaptability, with a scrap copper recovery rate of up to 95%.

The production line utilizes copper ore as raw material to produce anode plates. Copper ore is melted and cast into crude copper slabs with a copper content of 98.5%. The production process is concise, highly adaptable, with a copper recovery rate of up to 95% from the copper ore.

The raw material used in this production line is electrolytic copper with 99% copper content, and the advanced electric furnace is selected to produce oxygen-free copper rods with oxygen content of not more than 50 ppm, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-induction continuous casting process. This production line can produce 1000T of copper per month. Due to the process of this production line is selected on the introduction method, this production line equipment investment is small, flexible plant layout, can also be in the same machine to produce different specifications, different varieties of copper.

The raw material used in this production line is electrolytic copper with 99% copper content, and the advanced electric furnace is selected to produce oxygen-free copper rods with oxygen content of not more than 50 ppm, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-induction continuous casting process. This production line can produce 1500T of copper per month. Due to the process of this production line is selected on the introduction method, this production line equipment investment is small, flexible plant layout, can also be in the same machine to produce different specifications, different varieties of copper.

The raw materials used in this production line are copper scrap and electrolytic copper with 99% copper content, and the advanced electric furnace is used to produce oxygen-free copper rods with oxygen content of not more than 0.02%, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-drawing method of continuous casting process. This production line can produce 500T of copper per month. Due to the process of this production line is selected on the introduction method, this production line equipment investment is small, flexible plant layout, can also be in the same machine to produce different specifications, different varieties of copper.

The raw materials used in this production line are copper scrap and electrolytic copper with 99% copper content, and the advanced electric furnace is used to produce oxygen-free copper rods with oxygen content of not more than 0.02%, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-drawing method of continuous casting process. This production line can produce 1500T of copper per month. Due to the process of this production line is selected on the introduction method, this production line equipment investment is small, flexible plant layout, can also be in the same machine to produce different specifications, different varieties of copper.

The production line utilizes raw materials consisting of 99% copper scrap and bright copper. It employs gas or fuel-fired furnaces for smelting and adopts the upward continuous casting method. This process yields oxygen-free copper rods with an oxygen content of no less than 99.5%, which serve as high-quality materials for wire and cable production—copper wire. This production line is suitable for countries or regions experiencing power shortages and frequent blackouts.

The production line utilizes raw materials consisting of 99% copper scrap and bright copper. It employs gas or fuel-fired furnaces for smelting and adopts the upward continuous casting method. This process yields oxygen-free copper rods with an oxygen content of no less than 99.5%, which serve as high-quality materials for wire and cable production—copper wire. This production line is suitable for countries or regions experiencing power shortages and frequent blackouts.

The raw material used in this production line is bright scrap copper wire or electrolytic copper sheet, and the advanced core furnace is selected to produce oxygen-free copper rods with oxygen content of not more than 0.02%, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using upward-induction continuous casting process. This production line can produce 400 tonnes of copper per month. As the process of this production line is selected by the upward-induction method, this production line has small investment in equipment, flexible plant layout, and can also produce different specifications and different varieties of copper on the same machine. The semi-finished products produced by this line can be used in the production of copper busbar.

The raw materials used in this production line are copper scrap and electrolytic copper with 99% copper content. The advanced medium frequency furnace is used to produce oxygen-free copper rods with oxygen content of not more than 0.02%, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-drawing method of continuous casting process. This production line can produce 60 tonnes of copper per month. Due to the process of this production line to choose the upper lead method, the production line equipment investment is small, flexible plant layout, can also be produced on the same machine with different specifications, different varieties of copper.