The raw material used in this production line is electrolytic copper with 99% copper content, and the advanced electric furnace is selected to produce oxygen-free copper rods with oxygen content of not more than 50 ppm, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-induction continuous casting process. This production line can produce 1000T of copper per month. Due to the process of this production line is selected on the introduction method, this production line equipment investment is small, flexible plant layout, can also be in the same machine to produce different specifications, different varieties of copper.

Aluminium Gravity Casting

Zinc-Aluminium Wire Production No.1

Bronze Pipe Or Bar Continuous Casting And Squeezing

The horizontal continuous casting copper bar production line consists of an industrial frequency combination furnace, a holding furnace, a haul-off machine, an automatic cutting machine and an automatic discharging mechanism,and so on.We are able to select different equipments according to the customer's copper bar specifications and output. The copper bar production line has the advantages of high automation, long mechanical life, low energy consumption and low material loss, and is now widely used by copper bar enterprises.

The production line utilizes copper ore as raw material to produce anode plates. Copper ore is melted and cast into crude copper slabs with a copper content of 98.5%. The production process is concise, highly adaptable, with a copper recovery rate of up to 95% from the copper ore.

The horizontal continuous casting copper bar production line consists of an industrial frequency combination furnace, a holding furnace, a haul-off machine, an automatic cutting machine and an automatic discharging mechanism,and so on.The 150-200T Copper Bar Production Line is a high-capacity manufacturing setup designed to produce a wide range of copper products, including copper bars, brass rods, copper wires, copper tubes, and bronze bars. This production line is optimized for efficiency and precision, ensuring that each product meets rigorous quality standards.

The raw material used in this production line is electrolytic copper with 99% copper content, and the advanced electric furnace is selected to produce oxygen-free copper rods with oxygen content of not more than 50 ppm, total impurity content of not more than 0.05%, and copper content of more than 99.5% by using the upward-induction continuous casting process. This production line can produce 1500T of copper per month. Due to the process of this production line is selected on the introduction method, this production line equipment investment is small, flexible plant layout, can also be in the same machine to produce different specifications, different varieties of copper.

Copper Clad Sand Casting

This production line produces copper cathode plate with copper scrap as raw material. After the anode plate is produced, workers clean it. After cleaning, the anode plate is put into the electrolysis tank filled with acid for electrolysis. After electrolysis, the cathode plate is taken out and cleaned. The copper plates produced in this way are of very high quality, with a purity of 99.9%. The production line has a short process, high adaptability and good product quality.